International Journal of Recent
Engineering Science

Research Article | Open Access | Download PDF
Volume 4 | Issue 5 | Year 2017 | Article Id. IJRES- V4I5P104 | DOI : https://doi.org/10.14445/23497157/IJRES-V4I5P104

Design and simulation analysis of anti-skid braking system for mine electric locomotive

Yulu Zhang, Zhaosong Li , Bin Liang and Jilei Xu

Citation :

Yulu Zhang, Zhaosong Li , Bin Liang and Jilei Xu, "Design and simulation analysis of anti-skid braking system for mine electric locomotive," International Journal of Recent Engineering Science (IJRES), vol. 4, no. 5, pp. 24-28, 2017. Crossref, https://doi.org/10.14445/23497157/IJRES- V4I5P104

Abstract

The motor vehicle as the research object, designed a new scheme of the brake, hydraulic disc brake used in motor vehicle design, anti-skid brake system for the control, PID control and non motor vehicle braking system for modeling and Simulation of the logic threshold value in MATLAB/Simulink. The simulation results show that the motor vehicle braking effect of motor vehicle use of anti slip brake system was better than that of non slip system; using PID braking system control algorithm is better than using logic threshold control braking system.

Keywords

motor vehicle, disc brake, PID control, MATLAB/Simulink.

References

[1] Zhuan X, Xia X. Speed regulation with measured output feedback in the control of heavy haul trains [J]. Automatica , 2008,44(1):242-247.
[2] Zhuan X, Xia X. Optimal scheduling and control of heavy hual trains equipped with electronically controlled pneumatic braking systems [J].Control System Technology, IEEE Transactions on,2007,15(6):1159-1166.
[3] Muhammad N.S.Hadi. Neural networks applications in concrete structures.Computers and Structures , 2003,(81):373-381.
[4] BU Fanping，TAN Hanshue．Pneumatic Brake Control for Precision Stopping of Heavy-Duty Vehicles [J]．Transaction Control Systems Technology，2007， 15(1)：53-64．
[5] HIRC-O Yamazaki，MASAO Nagai，TAKAYOSHI．A Study of Adhesion Force Model for Wheel Slip Prevention control [J]．JSME International Journal，2004，47(2)： 496-501．